GMG’s fast-charging graphene battery holds up through 1,000 cycles in new tests
Graphene Manufacturing Group (GMG) has reported new cycling data for its fast-charging graphene aluminium-ion cells, which it is developing with Rio Tinto under a joint development agreement. The 1.5 Ah cells were built and tested by the Battery Innovation Center of Indiana (BIC) using materials GMG makes at its Brisbane development center.
According to GMG, a cell cycled at 7C showed no performance reduction after 1,000 cycles as of October 7, double the cycle life of its previous update. At 10C, which is a six-minute charge and discharge, a second cell lost 10% of its capacity after 393 cycles. A well-known lithium titanate (LTO) cell tested at 10C fell to 80% of its original capacity within 82 cycles. Energy density at the 10C rate rose 48% to 58 Wh/kg, from 39 Wh/kg in the previous update. GMG also reports an energy efficiency of 94% at these rates, compared with 64% for the LTO cell.
The company says it now aims to improve energy density and 10C cycle life and to move to larger cell formats.
This follows GMG’s earlier battery update and its agreement with BIC.
Bob Galyen, GMG Director and former Chief Technology Officer of CATL, commented: "The cycling stability we are seeing from these G®CELLS is genuinely exceptional. Reaching 1,000 cycles with no performance reduction, while every cycle is charged and discharged in six minutes, stands in stark contrast to the LTO benchmark cell. LTO is regarded as one of the most robust fast-charging chemistries on the market today, yet it degraded to 80% of its original capacity within 82 cycles under the same six-minute charge and discharge time. Just as important is the 94% energy efficiency at these high rates, compared with 64% for the LTO cell. Energy that isn't lost as heat is what makes fast charging practical at the system level. Having built and scaled battery manufacturing for the world's largest lithium-ion producer, I know how rare it is to see fast-charge durability, high efficiency and rising energy density together this early in a cell's development. There is further work ahead on extending cycle life at 10C and scaling the cell size, but the fundamentals being demonstrated here are the right ones to be solving first."
Craig Nicol, Chief Executive Officer and Managing Director of GMG, commented: "This data set from BIC is an important proof point for our graphene battery program. Since our last update we have doubled cycle life to 1,000 cycles with no performance reduction and lifted energy density by 48% to 58 Wh/kg at a 10C charge rate. We have also achieved 94% energy efficiency, all while charging and discharging in six minutes. Fast charging is one of the biggest barriers to broader electric vehicle and energy storage adoption. These results show G®CELLS lasting around ten times longer than a comparable LTO cell charged and discharged in the same time. Our focus now is on continuing to improve energy density and 10C cycle life, and on scaling to larger cell formats. I want to thank the team at BIC and our partners at Rio Tinto for their continued collaboration as we progress this technology along the roadmap."
Jack Perkowski, Chairman of GMG, commented: "Battery development of this kind requires patient capital, disciplined engineering and world-class partners, and this update reflects progress on all three fronts. Since our last update, cycle life has doubled and energy density has risen by 48%. This data was generated by BIC, an organisation with over 10 years of experience and more than 500 battery development projects behind it, on cells built with GMG's graphene materials. That gives the Board real confidence in the direction of this program. Combined with the ongoing support of Rio Tinto, I believe GMG is building the right foundations to advance this technology toward commercial relevance. The Board will continue to support management as they work through the optimisation and scale-up steps ahead."