Scientists at the University of Wisconsin-Madison and Japan's National Institute for Materials Science have directly measured, for the first time at nanometer resolution, the fluid-like flow of electrons in graphene. The results could have applications in developing new, low-resistance materials, where electrical transport would be more efficient.
Graphene is a pure electrical conductor, making it an ideal material to study electron flow with very low resistance. Here, the researchers intentionally added impurities at known distances and found that electron flow changes from gas-like to fluid-like as temperatures rise.
"All conductive materials contain impurities and imperfections that block electron flow, which causes resistance. Historically, people have taken a low-resolution approach to identifying where resistance comes from," says Zach Krebs, a physics graduate student at UW-Madison and co-lead author of the study. "In this study, we image how charge flows around an impurity and actually see how that impurity blocks current and causes resistance, which is something that hasn't been done before to distinguish gas-like and fluid-like electron flow".
The researchers intentionally introduced obstacles in the graphene, spaced at controlled distances and then applied a current across the sheet. Using a technique called scanning tunneling potentiomentry (STP), they measured the voltage with nanometer resolution at all points on the graphene, producing a 2D map of the electron flow pattern.
No matter the obstacle spacing, the drop in voltage through the channel was much lower at higher temp (77 kelvins) vs lower temp (4 K), indicating lower resistance with more electrons passing through.
At temperatures near absolute zero, electrons in graphene behave like a gas: they diffuse in all directions and are more likely to hit obstacles than they are to interact with each other. Resistance is higher, and electron flow is relatively inefficient. At higher temperatures -- 77 K, or minus 196 C -- the fluid-like behavior of electron flow means they are interacting with each other more than they are hitting obstacles, flowing like water between two rocks in the middle of a stream. It is as if the electrons are communicating information about the obstacle to each other and diverting around the rocks.
"We did a quantitative analysis [of the voltage map] and found that at the higher temperature, the resistance is much lower in the channel. The electrons were flowing more freely and fluid-like," Krebs says. "Graphene is so clean that we're forcing the electrons to interact with each other before they interact with anything else, and that is crucial in getting them to behave like a fluid."